Powerflex VW MK4 R32 (2004 - 2006) Front Anti Bar Link Bushing Kit

Part # PFF85-412x2
Price: $54.99 Each

Increase your car's handling performance by getting rid of the soft rubber stock bushings. These Powerflex urethane replacements will improve performance, prolong tire life, and bring older cars back to life!

These bushings are sold in the required number for one car for the specified location.

 
This is the #4 item in the chassis diagram.


About Powerflex

Powerflex polyurethane bushings are designed to decrease the amount of deflection in your car's suspension for better handling, driver feedback, and tire wear. We use a premium polyurethane formulated specifically for our company to provide minimal NVH (noise, vibration, harshness) and increased longevity over the stock rubber bushings. The quality of Powerflex products is visible the moment you open the box: premium polyurethanes, detailed moldings, and CNC-machined 304 stainless sleeves. Lube-holding grooves and knurls will ensure the supplied copper-based grease stays in place for extended squeak-free operation.

Powerflex products carry a Lifetime Warranty on every part produced.

Powerflex is a truly engineered product, not just a copy of the stock part in a different material. We have redesigned many common factory failure parts, allowing the articulation required to far outlast the stock part it is replacing while maintaining control of the movement for increased performance. Additionally, Powerflex Engineering Line products for some fitments include unique features like polyurethane monoballs and offset geometry to provide ultimate performance without the harshness of a metallic monoball race part. Polyurethane engine/drivetrain mounts and reinforcements are available for some fitments to reduce movement for better throttle response and more power to the wheels.

Bushings are produced in one of three durometers – yellow (70A –stiffer than rubber), purple (80A), and black (95A – very stiff) measured hardness. Unlike other brands using only one urethane for all applications, Powerflex design engineers choose the correct hardness to allow for the specific movement or rigidity required for each location while minimizing unwanted NVH. Urethane hardness is standardized per fitment and location, but select parts are available in an optional stiffer urethane for track and autocross performance where NVH is less important.

Powerflex bushing offerings are very thorough, but are sold per location to fit each customer's specific needs. An automobile's bushings and mounts wear at different rates making "complete-kit" bushing sets unnecessary for most buyers. Replacing only the weak links in your car's suspension is a great way to tighten handling without stressing the budget.

Powerflex copper-based grease is supplied with every bushing set. We suggest using only a copper-based grease for lubrication. Bushings will rarely need re-lubing due to the unique grooves and knurls cast into the material to hold the lubricant. We do not suggest using an "anti-seize" product for lubrication.

Powerflex Warranty

PowerflexUSA is proud to offer a Lifetime Warranty on the entire range of products we sell.

This Warranty applies to the original purchaser. The only conditions that we attach to this Warranty are:

  • In the event of an issue you contact us directly at service@powerflexusa.com with where you purchased your part, a copy of the invoice, and details of the installation and any changes made to the car, photos of failed parts and the installation.
  • The Warranty is limited to the replacement of suspension bushings supplied, not including shipping charges.
  • There is no warranty cover for consequential part failure or labor for installation.

Powerflex has taken this direction because of the confidence that we have both in our products and also in the way that we have handled any warranty issues in the past.

We have never had a time period based warranty policy because we have always treated issues that customers have had as an opportunity to learn. Where a problem has occurred due to incorrect fitting, we have always asked ourselves if the reason for the error was due to poor fitting instructions. When we have had a part failure we have tried to understand if the part was being used outside of its design parameters. And like all manufacturing we have had the occasional material quality issue and in these cases we have always replaced parts without question.

Thank you for your support of our product and help in making it the best urethane bushing available!

 

 
Images are provided by the manufacturer/supplier and may be a generic photo for representation purposes, and not of the actual product. Pricing also subject to change without notice.


GMP 710 Pressley Road Charlotte, NC 28217 Phone: 888.488.2028 Fax 704.523.4910