888.488.2028

Audi C7 Chassis A6/A7/S6/S7 EuroCode ÜSS Billet Aluminum Adjustable Rear End Links (EC0202-0105)

$193.00 Set of 2

EuroCode’s rear endlinks are meant to be bought in conjunction with our adjustable front endlinks as part of EuroCode’s USS Stabilization system for the B8&B8.5 A4/S4/A5/S5/RS5/Q5 and C7 A6/A7/S6/S7/RS7 platforms.  Pair these front and rear endlinks our sway bars and Alu Kreuz drivetrain stabilizer to work as a complete suspension system.  A very common question is whether or not you will feel this upgrade on the street versus the track, and our answer is simple: absolutely.  The stock links are made from rubber and are obviously inferior to our endlink’s billet aluminum construction.  If you just upgrade your swaybars without the links, you put more pressure on the OEM unit and reduce the efficacy of your swaybars.  With this product, the weakest link (pun intended) is removed.  Our end links will allow you to tune your suspension, reduce the flex and fatigue that is prone with the factory rubber end links, and allow for the corner balancing of the suspension. Eurocode USS endlinks feature teflon-lined, spherical bearings which provide greater articulation over the OEM rubber endlinks. Our USS endlinks feature a design that was derived from motorsports and deliver smooth, resistance free sway bar motion while eliminating the deflection that takes place with the OE links. They also allow a much needed adjustability during performance vehicle alignments. These are the same types of parts that you would find on a no compromise race car suspension. As with all USS products, Eurocode strives to maintain similar standards to the OEM when it comes to noise, vibration and harshness (NVH). When installed properly, the USS endlinks should be virtually noise free, however over time, the bearings may be subject to wear and need to be serviced. Excessive noise is one of the characteristics of product wear and may necessitate the replacement of the bearings. Please note that although factory rubber links won’t make noise even after 100K miles, they are not working properly as they have lost elasticity. No noise doesn’t mean you have a good part. It means that the OEM was designed not to complain even if it’s long past its service life. Steel bearings on the other hand will alert you when it’s time for them to be replaced. Eurocode is proud to offer a 12 month replacement warranty* in the event of a manufacturers defect on the bearings, as well as the ability to service or replace the bearings for those outside the warranty period for a nominal cost, if necessary. *see warranty details    
EuroCode’s rear endlinks are meant to be bought in conjunction with our adjustable front endlinks as part of EuroCode’s USS Stabilization system for the B8&B8.5 A4/S4/A5/S5/RS5/Q5 and C7 A6/A7/S6/S7/RS7 platforms.  Pair these front an...
We opened Eurocode in 2001 to provide a place where other Audi and Volkswagen enthusiasts could get honest, quick, courteous and reliable answers and service as they maintained and modified their cars. Since then, we've gained a loyal and growing clientele, establishing relationships based on trust and integrity, honesty, professionalism, and meticulous, expert service. Our mission is to demystify VAG performance, to make tuning or upgrading your car straightforward and fun, and to simplify a process which at times can be daunting and intimidating. We work to do this through our approach to our customers and in the quality of our service. Here at Eurocode, we treat our customers' cars as our own, our customers as our family, and our business as our passion. We know that finding quality service can be difficult, and that finding a reliable, solid tuner can be downright frustrating if not at times alienating an even scary. We know the anxiety that can stem from not knowing who's working on your car, what their qualifications are, and what exactly they're doing to it. At Eurocode, we sympathize with these frustrations and work to take away the stress. Our goal is to make things simple by communicating with our customers in a down-to-earth manner, by telling them what we think in honest, straightforward terms, by listening to what they have to say, and by offering the very best service available. Our shop forman, for instance, is an actual Audi-Certified Master Technician who has worked on more VAG cars than you could shake a diverter valve at. Our fabricator can fix or fab anything you can imagine, and then some. Our tuner played a key role in introducing REVO to the west coast, continues to help develop the software, and for years now has been the top seller / tuner of REVO products in the United States. We strive to be the best at what we do and we stand by all of our work, so our customers can enjoy the easy confidence that comes with knowing they are in good hands. But don't just take our word for it. Talk to our clients and see what they have to say about us. Stop by the new shop, any time, if only to say hello and talk about cars for a few. We'd love to meet you, and would consider it an honor and privilege to gain your business. We simply love what we do, and would love to work with you in the future. Give us a call! We're looking forward to hearing from you, and to doing our best to serve whatever needs you may have. Sincerely, The Team at Eurocode Tuning
We opened Eurocode in 2001 to provide a place where other Audi and Volkswagen enthusiasts could get honest, quick, courteous and reliable answers and service as they maintained and modified their cars. Since then, we've gained a loyal and growing clientel...

Vehicle Galleries (1 photos available)