888.488.2028

Mercedes M157/M278 Weistec Anti Surge Valve / Water-Methanol Injection System (01-157-01680-9)

The Weistec ASV/WM Injection System adds multiple beneficial components to the M157 BiTurbo 5.5L engine.  First being the addition of a Weistec Anti Surge Valve (ASV).  From the factory the M157 engine was never given any type of bypass valve.  With out a bypass valve, the turbochargers are subject to compressor surge when the throttle closes after hard acceleration.   Compressor surge can be damaging to turbochargers and generally should be prevented to help ensure the best performance from the turbochargers.  The Weistec ASV is operated by the engine vacuum, opening when the throttle closes allowing the compressed air to be vented to the atmosphere instead of back flowing into the compressor housing and stalling the compressor wheel. The vented air produces the "blow-off" sound common on many modified turbocharged vehicles.

Second, is the Water/Methanol Injection (WMI) System.  Water/Methanol injection has been in use for several decades in multiple applications.  Originally, it was used to reduce knock while increasing power and performance in aircraft engines.  Eventually it came to be used in the motorsports industry where it was found to have substantial benefits on turbocharged engines.  The Weistec ASV/WMI System features an  Water/Methanol Controller with built in MAP sensor.  This controller is a progressive controller that slowly increases injection as boost builds, resulting in smooth and seemless operation.  The included Turbo Charge Pipes each have a built in bung, allowing the use of two injectors for uniform injection and cooling.  The combination of the cooling effects of methanol and the knock resistance of water result in significant gains in horsepower* and torque* as well as reduced chance of heat soaking the intercooler system.

This system is a complete, bolt on system that can be installed with out any guess work or custom fabrication.  Weistec has engineered and manufactured many of the components of this system to ensure a simple and straight forward installation. The gains in performance and consistency make this system an essential upgrade for the M157 engine.

Key Features:

  • Reduced Intake Air Temperatures

  • Increased Knock/Detonation Resistance

  • Up to 100 HP Gain*

  • Red Powder Coated Turbo Charge Pipes with built in injector bungs

  • Weistec Anti Surge Valve

  • Weistec Vacuum/Boost Adapter

  • Water/Methanol Controller with built in MAP sensor

  • Dual Weistec CNC Machined Injectior Bodies with built in check valves

  • Small, Medium and Large Quantity Injection Nozzles Included for a wide range of configuration

  • Trunk Mounted 2.25 Gallon Tank with racing cell cap and integrated pump mount

  • Trunk tank fits in spare tire well for a hidden installation

  • High Quality Quick Disconnect Fittings

  • Designed for 50/50 Water and Methanol Mixture

  • Compatible with Stock, W.3, and W.4 Turbochargers

  • All hardware and gaskets are included

ABOUT WEISTEC ENGINEERING

Based out of Orange County California, Weistec Engineering is an industry leader in research, development, and design. We have grown to provide customers with the highest level of satisfaction and value through relentless testing and continuous improvements in product and performance.

Specializing in computer aided design, and vehicle calibration, Weistec has the ability to manufacture quality products that are able to withstand even the most rigorous testing. From OEM vehicle manufacturers to the aftermarket performance enthusiast we aim to deliver innovative solutions that address a client’s needs.


ENGINEERING AND DESIGN

Engineering and design are the core services of Weistec. Combined experience from mutiple fields by our technical department allows Weistec Engineering to offer an array of services and capabilities. Whether you have an idea drawn on a cocktail napkin, or are looking to improve an existing design, Weistec will bring your concept to reality while protecting design form, and engineering function.

Knowledge is power. Weistec’s capabilities are available to aid companies in solving tough engineering and development challenges. Along with that is the ability to provide realistic solutions that will ultimately aid our customers in making effective decisions when it comes to production.

Weistec’s team and equipment allow quality production in house, insuring nothing but the best quality and shortest lead times for our customers.



SERVICES AND CAPABILITIES

CAD, Computer Aided Design

CAM, Computer Aided Machining

FEA Simulation for Fluid Dynamics, Static and Dynamic Loading

Rapid Prototyping from SLA to Investment casting.

Plastic injection molding

Vacuum form molding

CNC

Complex sheet metal bend and form

Laser and waterjet cutting

Laser Engraving and Etching.

Casting


Tooling

Reverse Engineering and Part Inspection

3D Laser Scanning

CMM, Coordinate Measuring Machine

Dimensional measurement

Profile measurement

Angularity or orientation measurement

Depth mapping

Digitizing

Imaging

Shaft measurement