Fitment
| Make | Model | Years | Chassis | Engine |
|---|---|---|---|---|
| Audi | SQ7 | 2020-2023* | 4M/4M.5 | 4.0 TFSI |
| Audi | SQ8 | 2020-2023* | 4M8 | 4.0 TFSI |
*Note: 2024 and later model year ECUs will be supported with future updates.
The Benchmark Just Moved
Your SQ7 or SQ8 isn’t just something you take out on weekends. It’s the daily driver, the road trip car, the SUV that handles everything life throws at it, backed by decades of Audi performance engineering.
034Motorsport Dynamic+ software builds on that foundation the right way. More power without sacrificing the smoothness and drivability you expect every day.
Audi uses “Dynamic” for its performance factory modes. Dynamic+ picks up where Audi left off, providing transformative performance in a package as refined and reliable as if it came from the factory with it. For us, Dynamic+ isn’t just a name. It’s the approach to tuning that we’ve refined across dozens of Audi platforms for over 20 years.
Every calibration is built with Dynamic+ in mind, making real gains without compromising quality, reliability, drivability, or usability.
How It’s Made
Dynamic+It’s all about process
Explore the extensive work that goes into all Dynamic+ software.
Baseline Is Everything
Every calibration starts the same way, with a completely stock vehicle. No assumptions, no shortcuts. Just a baseline.
Before anything changes, we spend time understanding how the car behaves as Audi engineered it. How the ECU, TCU, cooling systems, and torque management all work together. That foundation matters because the goal isn’t to fight the car, it’s to work with it.
When you understand how everything interacts from the factory, you can build on it the right way. That’s how you add performance without chipping away at long-term reliability.
Where Development Happens
From there, development becomes a constant loop of testing, refining, and validating.
We’re not just upping the boost and calling it done. Every table, every limiter, every safeguard is reviewed and adjusted with intention. The ECU and TCU are calibrated together so power delivery stays smooth, predictable, and usable in real driving.
It’s a hands-on process. Changes are made, tested immediately, and then reworked again until everything behaves exactly how it should.
Data-Driven, Not Guesswork
Factory data only tells part of the story. Dynamic+ goes much further.
We use expanded logging through secondary CAN Bus systems, extra OBD connections, and external sensors to capture significantly more data than stock. That gives us a much clearer picture of what’s actually happening, and lets us make adjustments with confidence.
- Secondary CAN Bus and OBD ports for independent logging
- Live calibration with real-time ECU adjustments
- External sensors for EGT, EMAP, and other critical parameters
Every change is based on real data. Measured, validated, and refined to balance power with long-term reliability.
Beyond The Shop Walls
We don’t solely rely on the dyno to validate performance. The goal is to see how the car responds everywhere it might realistically be driven.
- Race Track Testing to push sustained load, heat, and repeated high-speed use
- Drag Strip Runs to evaluate acceleration, consistency, and launch behavior
- High Elevation Testing to see how the car adapts to thinner air and changing conditions
- Long-Term Mileage to confirm everything holds up over time, not just in short bursts
Each scenario exposes different variables. Together, they provide a complete picture of how the calibration performs in the real world.
The End Result
What you end up with isn’t just a faster SQ7 or SQ8. It’s a more complete one.
Through tens of thousands of road miles, hundreds of track miles, hundreds of drag passes and launches, altitude testing up to 12,000 feet, full capacity towing testing, and ambient temp testing from 5 degrees to 115 degrees, the Dynamic+ ECU and TCU tunes for the SQ7 and SQ8 keeps the refinement you expect, with a transformed experience ready and waiting for you at a touch of the throttle.
It starts every morning like stock, handles traffic without drama, and still delivers when you lean into it. This is what makes Dynamic+.
Key Features
- Refined Throttle Mapping
Precise, tailored adjustments to the throttle mapping allow for smoother drivability even at these higher outputs, removing delays and providing precise control of acceleration back to the driver.
- Increased Horsepower and Torque Throughout the Powerband
Power and torque are increased across the entire powerband, delivering stronger acceleration and a broader, more usable power curve in all driving conditions.
- Raised Standing RPM Limiter
The standing RPM limiter in Park and Neutral is raised to 6400 RPM for a more responsive free-revving experience, while the rolling rev limiter remains around 6800 RPM.
- Rescaled Boost Gauge
The factory boost gauge is rescaled to accurately reflect higher boost targets, providing more precise and meaningful driver feedback.
- Optimized Thermal Management & Safety Systems for Higher Power
Factory safety systems are adjusted to operate effectively at increased power levels, ensuring reliable protection without compromising performance. Thermal strategies are recalibrated to support higher performance while maintaining engine safety. Oil and coolant temperatures are actively managed, and EGT protection is enhanced through enrichment and air-mass adjustments to control heat under load.
- Optimized Launch Control
Launch control is recalibrated for stronger, more consistent acceleration, with optimized moment reserve and ignition timing to improve traction and repeatability.
- Full Torque on Stock TCU
Full engine torque is delivered while maintaining compatibility with the stock 8HP95 ZF8 transmission calibration, eliminating the need for a separate TCU tune.
- VariSpec
VariSpec adds user-adjustable features that allow drivers to tailor vehicle behavior for a more personalized driving experience.
Flash anywhere.
No laptop required.
Connect via Bluetooth to the Dynamic+ R4 Dongle and upload your tune directly from your phone or tablet — flash ECU and TCU software without touching a PC.
Everything you need, from your phone
034SPI pairs with the Dynamic+ R4 Flashing Dongle via Bluetooth to deliver a full suite of tuning, monitoring, and diagnostic tools — no Windows PC, no cables, no shop visit needed.
VariSpecMake It Yours
034Motorsport VariSpec is a feature customization suite within 034SPI, giving you direct control over market-first features and functionalities within your tunes. Instead of being locked into a single feature set, VariSpec lets you tailor key performance and drivability features to your hardware, driving style, and personal preferences.
With VariSpec on your EA825 4.0T, you can configure things like:
- User can enable/disable crackle overrun/burbles present on throttle liftoff, and if enabled, select their desired crackle duration in 0.5-second intervals from a minimum of 1 second to a maximum of 2.5 seconds.
- User can select how they would like the exhaust flaps to actuate, from stock, Dynamic+ optimized, Always Open in All Drive Modes, and disable flaps altogether to remove performance limitations if an aftermarket catback without flaps is installed, without the need of flap sensor cancellers.
- Allows for tuned engine performance output safely on a stock/untuned transmission
- Users can select whether they would like to enable or disable the OEM cylinder deactivation program for fuel savings
- Users can choose whether the start/stop system functions like stock, or is off by default and can be re-enabled via the in-car button each key cycle.
- Allows for the throttle to be applied while applying the brake, great for Brake Boosting or performance trail-braking
- User can Enable or Disable the factory Top Speed limiter
From subtle daily driving to aggressive performance, you can dial in your experience.
TCU Matters Too
8HP95 ZF8 TCU tuning for the 4M.5 SQ7 and 4M8 SQ8 features targeted, tailored calibrations designed to complement increased engine power. These refinements ensure smooth, refined power delivery while enhancing shift quality, drivability, and everyday usability. The result is a more responsive yet comfortable driving experience that seamlessly integrates added performance with OEM-like behavior.
Improved Torque Management
- Torque calibration is specifically optimized for the EA825 4.0T and 8HP95 ZF8 transmission, ensuring the TCU remains fully aligned with increased output. This allows the drivetrain to handle higher torque levels with confidence while preserving the smooth, refined performance expected from the 4M.5 SQ7 and 4M8 SQ8 in all driving conditions.
Gear Display in All Driving Modes
- The active gear is displayed across all drive modes, providing constant visibility and improved driver awareness. This added feedback enhances driver confidence and control, whether cruising or pushing the vehicle in more dynamic driving situations.
Kickdown Switch Disabled in Manual Mode
- Kickdown is disabled in Manual mode, preventing unintended downshifts when pressing through the throttle detent. This ensures the 8HP95 ZF8 transmission holds the selected gear, giving the driver full control during spirited driving or when precise throttle modulation is required.
No Auto Upshift
- Automatic upshifts at redline are disabled in Manual mode, allowing the 8HP95 ZF8 transmission to hold the selected gear until the driver initiates a shift. This delivers a more engaging and predictable driving experience, and is especially beneficial for performance driving scenarios such as canyon runs, track days, HDPE, and autocross.