888.488.2028

Audi B9 A4/A5/Q5 2.0T Integrated Engineering Performance Transmission Tune

FAST CARS DESERVE FAST SHIFTS

Your iE tuned Audi A4 or A5 delivers the gains. The iE TCU Tune puts that power down. By synchronizing shift behavior, torque delivery, and RPM limits to perfectly align with iE Stage 1, 2, and 3 engine tunes, the drivetrain works as one. Faster shifts. Smarter gear selection. Stronger acceleration. A driving experience that feels sharper, more responsive, and fully dialed.

SHIFT LIKE YOU MEAN IT

Fast cars deserve fast shifts. The factory calibration is built for comfort and a smooth ride - characteristics that deliver early shifts, delayed response, and gear hunting when pushed. iE TCU tuning fixes that by rewriting shift logic, increasing clutch pressure, and removing torque limits. The result is fast, decisive shifts that hit exactly when you expect them and stay locked under power. No confusion. No slip. No clunks. Just smooth, fast, and precise shifts that keep you pulling hard through every gear.


CONFIDENCE IN EVERY SHIFT

We don’t rush it, we safeguard it. iE TCU tunes are developed over months and validated across real cars and real driving conditions worldwide. Every change is shaped by driver feedback and proven where it matters most. Clutch pressures are carefully increased and controlled to prevent slip without overstressing components, while advanced safety logic reduces power if temperatures climb too high. Fast, precise shifts. Full power when you want it. Protection when you need it.


BUILT FOR EVERY DRIVE

Unlike tunes that just raise RPM and speed up shifts, iE TCU tuning completely reworks how your transmission behaves in any scenario. Shift points are smarter when you push it and smoother when you don’t. Reduced take-off lag gets you moving quicker, while the gear display keeps you informed in both drive and sport modes. Upshifts and downshifts land exactly where they should. So good, you’ll forget it’s even there.


HITS DIFFERENT

Flat out, no lift. AMAX keeps both clutches engaged during shifts, so power never drops between gears. From launch to redline, acceleration stays uninterrupted and keeps pulling. Push through the kickdown switch while building launch control to unleash the full attack. Faster, harder acceleration on demand where other tunes lift off. This is your unfair advantage.


TCU GUIDE

What TCU Tune should I run?

STAGE 1 & 2: START HERE

Running an iE Stage 1 or Stage 2 ECU tune? The iE Stage 1 TCU Tune unlocks faster shifts, improved acceleration, a 6800 RPM limit, and full power delivery. Perfect your iE Tuned stock turbo A4 with a fully dialed performance drivetrain.


STAGE 3: BIGGER TURBO

Running an iE Stage 3 hybrid turbo setup? You need the Stage 3 TCU Tune. The added power from iE Stage 3 ECU tuning and the Turbo Systems hybrid turbo requires a transmission calibration built to handle it. The Stage 3 TCU features optimized shift scheduling, faster shift speeds, increased clutch capacity, and a 7200 RPM limit to match the turbo’s powerband. Required for all iE Stage 3 ECU tunes.

 

REQUIRED FOR iE STAGE 3 ENGINE TUNING

 

 

 

 

YEAR

MAKE

MODEL

ENGINE

DRIVE

2017-2020

Audi

A4

2.0T

AWD

2017-2020

Audi

A5

2.0T

AWD

2017-2020

Audi

Q5

2.0T

AWD

imgFITMENT NOTES

Compatible with 2017-2020 DL382 DSG "Gen 1" transmissions only. TCU tune is currently incompatible with all 2021+ "Gen 2" TCU versions. In some rare cases, 2019 and 2020 model year vehicles may be equipped with unsupported Gen 2 variations.


About IE

At Integrated Engineering (IE), we love to build, drive, create and innovate performance driven Volkswagen and Audis. We know first-hand the importance of quality designed, engineered, and reliable parts. That is why our team is dedicated to providing high-quality automotive performance products without compromising quality. We specialize in making your Audi or Volkswagen go faster for longer and stand behind all our products.

Our customers have grown to expect a quality build and finish that we strive to over deliver on, not only to manufacture the best, but to ensure the final product performs as well as it was engineered. This begins with an in-depth design process that can take months to years, and through specialized software, the digital product is designed and re-imagined many times over. From here, many products are "rapid prototyped" in ABS plastic to check dimension, fit, and in some cases application. Many of our high-power performance products such as connecting rods, camshafts, and valve train components undergo hours of ruthless testing on our in-house engine and chassis dyno facilities. This ensures that our products have real world-data, for real-world results, on real-world cars. At Integrated Engineering, we believe our commitment to bring you the highest quality performance products available with un-compromised performance truly sets us apart from the rest. 

What began as two brothers, Peter & David Blais grew up with a shared passion for racing. That passion grew and Integrated Engineering was founded in 2007 in Salt Lake City, Utah. Since then, IE has set a new standard for performance products in many areas including connecting rods, camshafts, valve train, and billet accessories. Integrated Engineering has made a mark in the enthusiast community and continues to offer the quality and performance orientated product our customers demand. Our passion for the VW & Audi performance industry is clear, whether you interact with us on our website, phone, email, or online.